This high-quality charger for lithium batteries is in one
Plastic housing installed.
Attention! Check in the technical data whether the charger is suitable for your rechargeable battery!
Charging time:
A rule of thumb for calculating the charging time results from the battery capacity and the charging current.
For example, a completely depleted battery with 20Ah capacity and a charger with 2A charging current
this approximately:
20Ah: 2A = 10h maximum charging time with 2A charger
Of course, the charging time will be shortened depending on the charging state of the battery.
Application:
First connect the charging port to the battery, then connect the mains plug to the usual 230V
Connect the mains socket. An LED display on the charger symbolizes the charging. After full charge
the charger switches off and the LED display symbolizes the full charge. Your battery is fully charged
and can be used.
Technical specifications:
Model c36-303 in plastic housing
Configuration, suitable for 36V 10S Li-ion - Lithium battery output 42V
Input 100-240VAC 50 / 60Hz
Nominal voltage 36V
output 42V
Charging current max. 2A
Operating temperature 0 ° C to 35 ° C
Display LED red - charge / green - charged
Connection input Schuko for house socket
Connection output XLR plug
Polarity Pin1 + Pol / Pin3 - Pol
Dimensions l * b * h approx. 140mm * 60mm * 32mm
Weight about 270g
Warning not suitable for LiFePo4 or lead batteries
